These petroleum-based air compressor oils are especially formulated to reduce carbon and varnish buildup. These oils contain fluid zinc to effectively fight friction and wear, thus reducing heat and foaming. Available in six ISO grades.
AC Series Air Compressor Oils are available in Bottles, Jugs, Pails, 1/4 Drums & Drums.
LUBRIPLATE AIR COMPRESSOR OILS
LUBRIPLATE “AC” Oils are dual-purpose or multi-functional lubricants for use in air compressors, hydraulic systems and oil recirculating systems. LUBRIPLATE “AC” Oils for air compressors offer excellent lubrication at elevated temperatures and high pressures, providing sustained operation and lower maintenance cost by reducing carbon and varnish build-up.
LUBRIPLATE “AC” Oil Features:
• Fluid zinc for anti-wear properties.
• High natural V.I. for stable viscosities throughout a wider operating temperature range.
• High aniline points for controlled seal-swelling characteristics.
• Rust and corrosion resistant properties.
• Chemical and mechanical stabilities.
• Foam suppression properties.
• Good heat transfer properties.
• Thermal oxidation stability.
• Good demulsibility properties.
Typical tests on
LUBRIPLATE “AC” Oils are as follows:
Product AC-0 AC-1 AC-2 AC-2A AC-3 AC-4
Viscosity SUS @ 100°F 160 213 309 518 690 840
cSt @ 40°C 31 42 64 99 135 162
Viscosity SUS @ 210°F 46 49 54 66 75 83
cSt @ 100°C 6 7 8 12 14 16
Viscosity Index 136 120 106 104 102 101
Flash Point, °F/°C 415/213 420/216 430/221 445/230 460/238 470/243
Fire Point, °F/°C 440/227 450/232 465/240 480/249 510/266 525/274
Pour Point, °F/°C -30/-34 -25/-31 -20/-29 -15/-26 -10/-23 0/-18
API Gravity 31.6 31.0 30.5 29.5 29.4 29.3
Color 2- 2+ 3- 3- 3- 5-
Approximate SAE No. 10 20 20 30 40 40
ISO Viscosity Grade 32 46 68 100 150 220
Aniline Point °F. 214 220 226 241 242 242
Oxidation per ASTM D-943 -------------------------------
Typically Above 3000 Hours -------------------
4-Ball Wear mm. Scar Dia. 0.50 0.43 0.46 0.46 0.46 0.44